Design For Six Sigma

Design for Six Sigma (DFSS) is the application of Six Sigma principles to the design of products and their manufacturing and support processes. Whereas Six Sigma by definition focuses on the production phase of a product, DFSS focuses on research, design, and development phases. DFSS combines many of the tools that are used to improve existing products or services and integrates the voice of the customer and simulation methods to predict new process and product performance.

DFSS can be compared to DMAIC (Design, Measure, Analyze, Improve, Control) and often the acronym DMADV (Define, Measure, Analyze, Design, Verify) is used to describe the strategy of DFSS. The precise phases or steps of a DFSS methodology are not universally defined. Most organizations will implement DFSS to suit their business, industry, and culture. DFSS methodology, instead of the DMAIC methodology, should be used when:

* A product or process is not in existence at your company and one needs to be developed
* The existing product or process exists and has been optimized (using either DMAIC or not) and still doesn't meet the level of customer specification or six sigma level
DFSS is a way to implement the Six Sigma methodology as early in the product or service life cycle as possible. It is a strategy toward extraordinary ROI by designing to meet customer needs and process capability. DFSS can produce the same order of magnitude in financial benefits as DMAIC. But it also greatly helps an organization innovate, exceed customer expectations, and become a market leader.

DFSS is the Six Sigma approach to product design-namely, designing products that are resistant to variation in the manufacturing process. Using DFSS means designing quality into the product from the start. You are preventing wasteful variation before it happens, thus being able to identify and correct problems early when the solution costs are less. A successful DFSS implementation requires the same ingredients as any other Six Sigma project: a significant commitment and leadership from the top, planning that identifies and establishes measurable program goals and timeline, and the training and involvement of everyone.

Planning for DFSS requires collecting the necessary information that will allow for error free production of defect-free products and processes that satisfy the customer profitably. DFSS attempts to predict how the designs under consideration will behave and to correct for variation prior to it occurring. That means understanding the real needs of your customers and translating those needs into vital technical characteristics of the product and ultimately into critical to quality (CTQ) characteristics of the product and process. You can then use design of experiments (DOE) to develop a robust design that optimizes efficiency and reduces defects.

Valid and reliable metrics to monitor the progress of the project are established early in the project, during the Measure phase if using DMADV. Key inputs are prioritized to establish a short list to study in more detail. With a prioritized list of inputs in hand, the DFSS team will determine the potential ways the process could go wrong and take preemptive action to mitigate or prevent those failures. Through analysis, the DFSS team can determine the causes of the problem that needs improvement and how to eliminate the gap between existing performance and the desired level of performance. This involves discovering why defects are generated by identifying the key variables that are most likely to create process variation. Failure Mode and Effect Analysis (FMEA) and Anticipatory Failure Determination (AFD) can be used for both the design of the product and the design of the process.

DFSS provides a structured way to constructively use the information learned from these analyses. Armed with real data produced by the DFSS process, you can develop competent manufacturing processes and choose processes that are capable of meeting the design requirements. Further analysis can verify and validate that the product design will meet the quality targets. This can be accomplished through peer reviews, design reviews, simulation and analysis, qualification testing, or production validation testing.

The benefits of DFSS are more difficult to quantify and are more long-term. It can take over six months after the launch of the new product before you will begin to see the true measure of the project improvements. However, the eventual return on investment can be profound. This is especially true when the organization can use the DFSS project as a template for fundamental changes in the way it develops new products and processes across the organization.

Listed below are more articles related to the above article from the "Business Process Management" article category.

People interested in the above article "Design For Six Sigma" are also interested in the related articles listed below:

Six Sigma and its Key Elements

Six Sigma is basically a business process that allows companies to improve their profit margins. Six Sigma stands for Six Standard Deviations. Six Sigma methodology provides the techniques and tools to improve the capability and reduce the defects in any process. (Sigma is the Greek letter used to represent standard deviation in statistics) from mean.

Making These Decisions Will Change Your Life

The ability to choose is one of the greatest gifts humans have. However, the gift is only yours when you choose to consciously use it. You make hundreds, if not thousands, of choices every day - often with no realization that you even made a choice. What to wear; what to eat; where to go; wear a coat; every single thing you do involves making a choice. However, making these choices - every day, more than once - will impact your future in very positive ways, if you choose.

What to Expect From PRINCE2 Foundation Training

PRINCE2 Foundation Qualification will be an asset to anyone who comes into contact with project management.

Control Company Assets with Asset Tracking Software

Tracking assets is an important concern of every company, regardless of size. Assets are defined as any 'permanent' object that a business uses internally including but not limited to computers, tools, software, or office equipment. While employees may utilize a specific tool or tools, the asset ultimately belongs to the company and must be returned. And therefore without an accurate method of keeping track of these assets it would be very easy for a company to lose control of them.

ISO Certification for Small Business

There are some companies out there as small as two people that are ISO certified. In terms of size, companies range from the very small, to under 100 employees, to between 200 - 300 employees.

Steps in the ISO Registration Process

Once the manuals are done, processes are documented, and people trained, the company will contact a registrar to schedule their audit. Then they will go through a document review and assessment audit.

How to Integrate Lean Manufacturing and Six Sigma

Six sigma is now the most common continuous improvement tool in business. It is often combined with lean manufacturing to form the lean six sigma improvement method.