This tutorial will provide detailed instructions for soldering stained glass panels.
This article will provide detailed information on how to properly and most successfully score (cut) glass pieces and shapes for use in creating stained glass.
Patinas are used to color or darken solder lines. The most common patina colors are black and copper. Using patinas brings the focus on the glass and the design of your stained glass piece. This makes the glass colors, textures and designs of the stained glass piece the main focus.
A zinc frame on stained glass panels is essential for structure and rigidity. The zinc frame is added once the design is cut, foiled and soldered. The process of adding a zinc frame is accomplished by following seven steps.
Further breakdown of one of the steps necessary when making stained glass.
The process of foiling stained glass begins with washing the individual cut pieces for your design. Fill a small basin with water with a couple tablespoons of ammonia. Dip the pieces in the solution then dry thoroughly with a clean lint-free towel. Be sure to clean all edges and surfaces of each piece. Once the glass is completely dry, wrap the edges of each piece with copper foil and burnish the foil to the glass. This insures proper adhesion of the foil to the glass.
There are two ways to make stained glass, leaded or copper foiled. The major difference between the two is in the construction. With leaded stained glass, the glass is fitted into channels of lead came. In contrast, copper foiled stained glass is constructed by wrapping each piece of glass with copper foil.
We are pleased to offer you this exciting, new, and entirely free professional resource.
Visit our Free Industry resource center today to browse our selection of 600+ complimentary Industry magazines,
white papers, webinars, podcasts, and more.
No credit cards, coupons, or promo codes required.
Try it today!
